the torch burner
AEM torch burners feature a specific design containing a flame nose concentrating an impingement flame equipped with an atmospheric air/gas mixer (combustion air entrainment by the gas jet). 3 main ranges:
- HP/AI torch burner range (atmospheric combustion air entrainment by single venturi)
- HP/ACM torch burner range combustion air entrainment enhanced by a compressed air supply
- HP/MV torch burner range (distributed atmospheric combustion air entrainment via multiple venturis)
Industrial atmospheric torch burners
HP/AI torch burner
Specially designed for impact and concentrated industrial heating needs, HP/AI torch burners are available in a range of 8 power models from 1 to 300 kW gross calorific value.
- All-round flames
- Oxidising or reducing flame depending on air intake adjustment
- Natural gas or propane from 250mbar to 3 bar
- In-line air/gas mixer, 90° or 135° elbow
- Nickel/chrome-treated steel nose or refractory steel nose
HP/ACM torch burner
HP/ACM AEM torch burners are “induced air” burners with the addition of compressed air, allowing the nominal power to be increased for an equivalent burner size.
- Power from 10 to 300 kW
- Great flexibility of use
- Suitable for use on pressurized combustion chambers
- Short flame“
- Multi-position flame
- Propane or Natural Gas (300 mbar to 2.5 bar)
- Compressed air (250 mbar to 4 bar)
- Heat-resistant steel nose only
HP/MV Multi-Venturi torch burner
Specially designed for industrial applications, AEM HP/MV torch burners are compact 7-venturi burners operating with induced air (IA) or motive compressed air (MCA).
- Power ranging from 300 to 650 kW
- Great flexibility of use
- Oxidising or reducing flame depending on adjustment
- Multi-position flame
- Propane or Natural Gas (300 mbar to 2.5 bar)
- Steel, stainless steel or heat-resistant steel nose, depending on operating temperatures
Oxy-gas atmospheric torch burner
Specially designed for industrial applications, AEM Oxygaz torch burners are “atmospheric air” or «motor compressed air» burners with the addition of oxygen in the torch nozzle.
- Power from 20 to 260 kW
- Multi-position flame
- High-temperature flame
- Propane or Natural Gas (300 mbar to 2.5 bar)
- Industrial oxygen at 4 bar max
- Heat-resistant steel nozzle
OPTIONS
- Securing of flare burners by thermocouple for all outputs below 70kW.
- Flame control of the blast burner by ionisation electrode or UV cell for all outputs.
- Automation and control.
- Torch burner adaptable to existing installation.
- Refractory concrete lintel.
- Custom mounting clamp or for breather pipe with 1 optional UV sensor support.
Compact low-pressure forced-draught torch burner
Compact semi-industrial ASBP torch burners
Specially designed for industrial applications, AEM Oxygaz torch burners are “atmospheric air” or «motor compressed air» burners with the addition of oxygen in the torch nozzle.
- 4 ASBP torch burner models are already available
- Power modulation scale: 1 to 3
- Runs on natural gas, propane, low-pressure butane (max. pressure 70mbar)
- Supply voltage: 230Vac
- Proposed nominal outputs: 24 kW, 32 kW, 40 kW and 52 kW
compact low-pressure forced-air torch burner for outdoor use
ASBP torch burner under casing
ASBP No. 4 torch burner with combustion fan and air/gas injection system. The air/gas injection system varies depending on the gas family.
- Burner available in 20kW, 28kW, 37.5kW and 52kW
- Operates on 20-30mbar natural gas; NG version
- Operates on 30-57.5mbar propane and 28-50mbar butane. LPG version
- Power supply: 230Vac.
- 75mm diameter chromed steel decorative collar.
- 0-10V modulation signal.
- On/off operation, programmable.





