The infrared radiant burner for industry
AEM radiant heaters feature a specific multi-shaped design for a harmonized distribution of the gentle heat from infrared radiation. They contain at least one radiant surface made of ceramic/metallic fiber and operate with atmospheric or low-pressure blown-air technology.
AHPP: atmospheric high pressure / LBPB: low-pressure blown air.
Radiant burner with metallic, refractile meshes
ATHP single-surface radiant heater with metal fibers
This metallic radiant burner designed by AEM can have a double or single face. Ideal for applications requiring a large and homogeneous heating surface, these burners use infrared radiation technology. This radiation is obtained by burning a premix of air/gas in a flame surface made of a metal mesh. These burners will be equipped with an automatic flame control and safety system in accordance with the EN ISO 13577-2 standard.
- Great flexibility of use
- Multi-position flame
- High temperatures
- Power from 100 to 10,000 kW/m² (infrared-blue flames)
- Natural gas at 300mbar to 2 bar or propane at 300mbar to 2 bar
- Aluminium or stainless steel housing
- Metal fiber welded or pinched onto the housing
Double-sided metal fibre radiant burners ATHP
This configuration of radiant heating distribution over 2 opposite surfaces allows gentle heating by 1 single burner for 2 tooling units or 2 high/low units or left/right units of the machine, which is mostly intended for the metallurgical industry.
- Power and form adapted to the requirements of the project
- Power from 100 to 1,000 kWh/m2
- Minimum burner thickness 120mm
- Inox combustion head housing
- 1 Atmospheric Mixer ATHP
- Natural gas at 100mbar to 2 bar or propane at 100mbar to 2 bar
ASBP single-surface radiant heater with metal fibers
This range of ASBP radiant burners has been designed for sites where there is no gas at pressures above 100mbar. This radiation is obtained by the combustion of a premix air/gas supplied mechanically in the flame surface made of a metal mesh. These burners will be equipped with an automatic flame control and safety system, compliant with the EN ISO 13577 standard.
- Maximum power of 70 kW and shape, adapted to the project specifications
- Power from 100 to 1,000 kWh/m2
- Min. thickness of the burner 80mm
- Inox combustion head housing
- 1 compact air/gas mixing system ASBP
- Natural gas 15 to 30 mbar or Butane/propane 25 to 50 mbar
Angled-flame bar burners
Red point burner
- All positions/orientations of the burner
- Maximum temperature of 1200°C
- Power from 20 to 100kW
- Use of natural gas or propane from 300mbar to 2 bar
- Diameter of the bowl 230mm
- No flame in contact with the part
- The efficiency of the red burner heater compared to a blue flame is about 25%



